2015 Ford Mustang 6 News

2015 6th Generation Ford Mustang News Blog

6th Generation Aftermarket Parts

Airaid Cold Air Inductions for 2015+ Ford Mustangs Can Really Give you a Boost

Airaid Intakes for your 2015-2017 Ford Mustang GT can really give you a boost in the HP department

You already own the best Mustang, or one of the best Mustangs ever built. You have more than enough horsepower, right? I guess that question should be answered by each individual 6th Gen owner. Personally, I feel you can never have enough horsepower. If you are like me then good thing companies like Airaid exist!

The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance gas and diesel applications, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration.

2015-2017 Ford Mustang GT Airaid

2015-2017 Mustang GT Airaid Cold Air Intake

 

They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-install system that was designed using extremely sophisticated technology to increase airflow while maintaining proper air / fuel ratios, therefore eliminating the need for re-calibration once installation is complete. Just bolt it on and go! Like any other AIRAID Intake System, the MXP includes an AIRAID Premium Filter that is sized to maximize power and efficiency. This intake comes with a SynthaMax dry blue colored filter that is cleanable and reusable.

 

2015-2017 Ford Mustang GT Airaid Intake

Cold Air Induction from Airaid for Mustang GT.

 

These Mustang GT Cold Air Intakes can be purchased from many online retailers. We found that PFYC has a great price and keeps them in stock. We do know that no matter where you decide to purchase your Airaid intake, you’ll be like a kid on Christmas when you smash the throttle for the first time!

 

Mustang Stage 1 Blade Spoiler Made in USA

Maybe it’s just me, but there’s always been something about the rear-end of a Mustang that just brings a smile to my face. It’s wide and aggressive and just all around well designed. Well, RPI Designs, located right here in the USA, has come up with a Stage 1 Rear Blade Spoiler that just took that rear end to a whole new level.

RPI Designs Stage 1 Rear Spoiler

 

This sleek new spoiler mounts directly where your existing spoiler is. No spoiler? No problem! RPI sends a template with every spoiler so you know exactly where to drill the holes to easily install your new rear spoiler.

RPI Designs Stage 1 Rear Spoiler

 

These spoilers are sold paint-matched to your car’s body color, and even come with a money-back guarantee for quality and paint-match. These guys have been making and painting parts for Corvettes and Mustangs for over 20 years and take great pride in their work. The 5-star rating we found on their website backs them up, in our opinion!

RPI Designs Stage 1 Rear Spoiler

 

Do yourself a favor and go check them out. Maybe it’s time to upgrade that rear end, and what better way than with a sleek blade spoiler?

RPI Designs Stage 1 Rear Spoiler

 

 

GTS 2015 Mustang Headlight Blackout Covers and Taillight Blackout Covers

Many Mustang owners know they’ve got one of the best looking rides in America – so how can a Mustang owner make their ride even a little cooler? GTS has long been known in the industry as the leader in light blackout covers. They have not disappointed us with their new 2015-2016 Mustang blackouts.

2015-2016 Ford Mustang GTS Blackouts

2015-2016 Ford Mustang GTS Blackouts

Designed for the 2015 Mustang, these GTS Smoke Headlight covers enhance the stealth and style of your ride. Easy to install, the protective layer is constructed with molded acrylic for superior durability, and requires no drilling or modifications to your vehicle. Available in smoke or carbon fiber look. The carbon fiber look has a pattern that allows more light to shine through than traditional smoke. The last photo above shows carbon fiber look covers installed.

2015-2016 Mustang GTS Headlight Blackout Kit

2015-2016 Mustang GTS Headlight Blackout Kit

 

GTS 2015 Mustang Taillight Blackout Covers

Designed for the 2015 Mustang, these GTS Blackout Tail Light covers enhance the stealth and style of your ride. Easy to install, the protective layer is constructed with molded acrylic for superior durability, and requires no drilling or modifications to your vehicle. Available in smoke or carbon fiber look. The carbon fiber look has a pattern that allows more light to shine through than traditional smoke. The last photo above shows carbon fiber look covers installed.
2015-2016 Ford Mustang GTS Tail light blackout covers

2015-2016 Ford Mustang GTS Tail light blackout covers

 

Blackout light covers are a great way to add a little more flare to your Mustang. You can find these at the leader E-Retailer for 2015 Mustang Parts, PartsForYourCar.com.

RPI Designs Releases 2015 Ford Mustang Painted Headlight Splitters

We all know that headlight splitters and Mustangs go hand in hand….they just look so good on the Mustang! Well you 2015 and 2016 Ford Mustang owners can now rejoice. RPI Designs has released the first known headlight splitters for the 6th generation. These pieces are very nice looking and come pre-painted all in Mustang exterior body colors as well as a hydro carbon fiber.

2015 Ford Mustang Headlight Splitters

2015 Ford Mustang Headlight Splitters

 

RPI Designs is proud to announce our brand new headlight splitters for the 2015 Ford Mustang. Our headlight splitters are made in house at our Ohio facility. Every set is painted to match the factory body color of your 2015 Ford Mustang. We have been painting parts for Corvettes and Mustangs for over 10 years. We guarantee our quality and paint match will be the best in the business or your money back.

2015 Ford Mustang Painted Headlight Splitters

2015 Ford Mustang Painted Headlight Splitters

 

You can pick up a set of these 2015 Mustang painted headlight splitters at one of two places we found on the web, RPI Designs in Ohio or Southern Car Parts in GA.

2015 Ford Mustang Painted Headlights Splitters

2015 Ford Mustang Painted Headlights Splitters

 

Borla Performance Exhaust Leading the Way in 2015 Ford Mustangs!

When it comes to putting a new exhaust system on your 2015 Ford Mustang EcoBoost, V6 or GT, there are no shortage of companies willing to take your money. But after doing quite a bit of research on the topic, we’ve decided that Borla really is the best bang for your buck. Borla has been manufacturing exhaust systems for decades, they build every single system in the USA, they only use quality stainless steel and the offer a million mile warranty. What more could you ask for?

Borla offers two different sound levels for the 2015 Ford Mustang. The Touring and the ATAK. The Touring system is a little deeper and louder than stock. A nice upgrade, but not too loud, a nice “between” option from stock and the ATAK. If you are a little more wild and you want to make sure your Mustang gets the attention it deserves, opt for the ATAK. This is quite a big louder and deeper tone than factory, and a few steps up from the Touring we spoke about earlier.

Borla offers entire exhaust systems, or just the muffler section, called “cat back”.

2015 Ford Mustang Touring Exhaust System

2015 Ford Mustang Touring Exhaust System

 

The 2015 Ford Mustang ATAK system, is louder and more aggressive. The photo below shows the ATAK syem in the axle back option.

2015 Ford Mustang Axle Back ATAK Exhaust System

2015 Ford Mustang Axle Back ATAK Exhaust System

 

If you’re looking to increase the exhaust flow for your Eco Boost Mustang, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang with all of the best benefits of an Rear Section Exhaust. The ATAK Multi-Core exhaust system has become renowned for its incredible quality. This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range.

We found a few aftermarket parts vendors that carry the Borla exhaust line for the 2015 Ford Mustang. Both Southern Car Parts and RPI Designs are reputable companies that will be able to help you make an informed decision on which exhaust system is best for your needs and wants.

2015 Ford Mustang NoviStretch Front Bumper Mask Seen on Stangs

As we were browsing the internet today for everything Mustang, we stumbled across this great looking new product, the NoviStretch front bumper mask. The vendors claim that this mask can be installed in minutes and provides great protection to the front end of the 2015 Mustang. We read that the mask can be installed or removed in minutes, which would make it idea for a long haul car show drive, or even a late night summer cruise (don’t hold your breathe, summer isn’t even close yet!) But when summer finally comes, then this mask should protect your Pony from the harsh elements, or should we say June Bugs that seem to litter the roadways.

This mask is made from a soft, nylon like, stretch material that will not scratch paint or leave residue behind like the old bras we remember from the 1980s.

 

 

2015 Ford Mustang NoviStretch Front Bumper Mask/Bra

 

This 2015 Ford Mustang Stretch Mask is a great solution for those Mustang owners that do not want to drill into their brand new Pony. This mask is a very easy installation and can be removed without any permanent modifications to your car. Once installed you can quickly remove the NoviStretch mask and store it in your Mustang’s glove box. Once installed, you can put on and take off in a matter of minutes.

 

 

2015 Ford Mustang Front Bumper Mask

 

The mask folds up very small and will fit inside your glove box, or center console. These masks are great for protection on long road trips, or on your way to a car show.

 

2015 Ford Mustang NoviStretch Bumper Mask

 

This really looks like a great product to us. You can find this new mask at Southern Car Parts or RPI Designs. It looks like this mask will cost you a little under $150.00. Not too bad for the added protection to your new Pony.

Daytona Speed Master Wheel Brush Makes Cleaning Your Mustang Easy

Most all Mustang owners I know have a few of the same problems while cleaning their pride and joy. The most common is the thought of cleaning those chrome wheels. Let’s face it, cleaning those wheels is just a pain in the neck. It seems like you can spend over a hour polishing them, after you get them clean from all the brake dust….not to mention bending over in that awkward position and then ending up at the chiropractor in a week. Ok, it might not be that bad, but it’s still a pain. We are fans of the Daytona Speed Master Wheel Brush, better known as the Mustang Wheel Brush.

The Speed Master Wheel Brush is the most advanced wheel detailing brush today! Built for quick, effective cleaning of all wheels, the Speed Master Wheel Brush has a state-of-the-art design that cleans any wheel surface and any wheel design – without scratching! Brake dust beware! There’s nowhere to hide from the Speed Master Wheel Brush.

2015 Ford Mustang Daytona Speed Master Wheel Brush

The braking systems in many vehicles generate a lot of brake dust. Coincidentally, these vehicles often have the expensive alloy wheels with intricate spoke designs.  These wheels look unbelievable when they’re clean, but how are you going to keep them clean?
The Speed Master Wheel Brush. This advanced wheel brush has everything you want in a quality detail brush and much more. The staff and I at Palm Beach Motoring studied all the various brushes on the market and compared their pros and cons. Ultimately I took our wish list for the perfect wheel brush to Dean Henderson at EZ Detail Brush, Inc. Dean had already created the ultimate motorcycle detailing brush with the EZ Detail Brush. With a few modifications, I knew we could create the ultimate auto detail brush.
Dean manufactured the Speed Master Wheel Brush to my exact specifications, right down to the hot rod red bristles. In addition, the Speed Master Wheel Brush has a thicker, reinforced stem. It maintains its flexibility but the new stem is more rugged for frequent use on auto wheels. The bristles are slightly feathered on the ends to gently clean delicate wheel finishes, such as coated or plated wheels, without scratching.
Here are the benefits of the Speed Master Wheel Brush:
Soft, nonabrasive 2 inch bristles. Whether the wheels are aluminum or clear coated, they can be scratched by the wrong brush. The Speed Master Wheel Brush features nylon Nylex bristles that are both flexible and durable. The end of each bristle is feathered to provide an extra gentle touch on delicate wheel finishes. Use the Speed Master Wheel Brush on highly polished aluminum, chrome, stainless, clear coated, and painted wheels with confidence.

2015 Ford Mustang Daytona Speed Master Wheel Brush

Patented memory bristles regain their shape. Detail brushes can lose their shape and their functionality over time because they’re pressed into the grooves and crevices of your car. The Speed Master Wheel Brush has special memory bristles that regain their shape after every use. Simply rinse the brush in hot water and hang it upside down to dry. The bristles will settle back into their original shape, just like new. Memory bristles allow the Speed Master Wheel Brush to remain effective when other brushes fall short.
Chemical resistant.The Speed Master Wheel Brush’s synthetic bristles can withstand all wheel cleaners and degreasers, even powerful aluminum wheel cleaners. Whereas natural bristles can eventually become dry and brittle, the bristles on the Speed Master Wheel Brush stay smooth, soft, and flexible.
Fits all wheel designs.The Speed Master Wheel Brush may look like a big brush, but it fits in the smallest spaces. Clean between wire spokes and even between the brake caliper and the wheel! The flexible bristles easily fold against the stem to a ½ inch thickness. When you’re finished cleaning the wheels, rinse the Speed Master Wheel Brush in hot water and hang to dry to restore the brush’s original shape.
Reinforced, flexible stem. Many of today’s wheel designs give you full visibility through the wheel. Brake dust literally has nowhere to hide! The Speed Master Wheel Brush is the solution. The upgraded, vinyl-coated wire stem flexes to reach all the way through the wheel to clean the edge on the other side! The 13 inch stem is of a heavier gauge wire to give it flexibility and stability. The vinyl coating protects the wheel from scratching. In fact, if you pull the bristles apart, you can see that the wire is completely covered for the entire length of the brush.
Safe bonded tip. The tip of the Speed Master Wheel Brush is coated in vinyl to protect the wheel from contact. No part of the internal wire stem is visible so there’s no chance of it scratching the wheel as long as the bonded tip stays in tact.
Knuckle guard protects your hands. A rubber guard above the handle helps protect your hands from cleaners or scrapes, because we know you really get into your work.  An ergonomic handle makes cleaning comfortable.

2015 Ford Mustang Daytona Speed Master Wheel Brush

We found a couple of vendors that carry this Daytona Wheel Brush, both Southern Car Parts and RPI Designs. Price is reasonable, less than $28.00. The way we look at it, that $28.00 will save you time for years to come and is well worth it.

APR Performance Introduces Carbon Fiber Front Splitter for 2015 Ford Mustang

Mustang owners are lucky in the fact that all 2015’s come from the factory with a front splitter. The only problem is the front splitter is just black plastic and might be a little boring. We found the aftermarket parts company APR Performance, they created a front splitter that is 100% real carbon fiber and replaces the existing, plastic splitter on all Mustangs.

2015 Ford Mustang APR Carbon Fiber Splitter

2015 Ford Mustang APR Carbon Fiber Splitter

 

Not just an audacious visual upgrade, the APR Carbon Fiber Front Splitter for your 2015 Ford Mustang also provides the highly desirable performance benefits of reduced lift and high speed stability, but what really makes APR Performance products worth your attention? The answer is simple: top shelf quality. Unlike some competitors’ products, APR items guarantee perfect fitment without damaging or expensive modification, and like the rest of their product line this Carbon Fiber Splitter is made of the best materials, all of which adds up to a killer finished product.

This fine looking splitter can be found at a few parts houses in the internet. We found them at Southern Car Parts and also RPI Designs.

As we find new and exciting products for the 2015 Ford Mustang, we will be sure to post them here and keep you Mustang fans in the loop.

Avoid Costly Bumper Damage on your 2015 Ford Mustang With Curb Alert

We have a great tip for all of you 2015 Ford Mustang owners. Ford was generous to include a front splitter on all 2015 Ford Mustang models. This beautiful front splitter can become a nightmare very quickly when pulling into a parking spot or perhaps an aggressive speed bump. We’ve seen and heard the stories from Mustang owners, how they lose or damaged their front splitter while parking. We called local dealerships and a new front splitter from Ford will set you back about $300.00. A very easy and less expensive way to avoid replacing your front splitter on a regular basis is either, don’t drive your Mustang, or simple purchase a Curb Alert bumper warning protection system. These nifty little units sell for roughly $149.00 and will warn you as you approach a curb or high area in the road.

2015 Ford Mustang Curb Alert

2015 Ford Mustang Curb Alert

The 2015 Ford Mustang Curb Alert is very easy to install and does not put a drain on your battery when the car is not on. Using a patented infrared technology, the front mounted sensor is calibrated to a warning distance of anywhere from 8-28″ (you decide with whatever you feel comfortable with). The warning alarm is hidden in the car and will give you three gentle tones when you are within a specified distance to the curb. The system gives you a short beep every time you start your car to let you know the system is active.

The Mustang Curb Alert is one of a kind and is a gadget that will save you money in the long run, preventing front end damage to any car that is low enough to be vulnerable to a Curb. Do not take a chance, get the Curb Alert to prevent curb damage.

  • Universal Mount (All Makes and Models)
  • Warns with an audible alarm before striking a curb that could damage your front bumper and/or spoiler.
  • Prevents embarrassing parking lot moments and sounds when your bumper or front spoiler hits a curb.
  • Sensor can mount in a discrete manner in the front end of most any vehicle and does not require any drilling.
  • Advanced infra-red triangulation technology and specialized software embedded for reliable operation.
  • Warning distance is adjustable from 8-28 inches. (Bumper to curb)
  • Removable when necessary with out leaving any holes as evidence.
  • Automatic power-up on vehicle ignition; never a battery drain.
  • Alert sound volume can be set to High, Low, or Mute inside vehicle.
  • Installation kit includes installation procedures, all wiring, wire ties, sensor calibration procedures, and user guide.

We found the curb alert over at the vendor www.rpidesigns.com and also www.southerncarparts.com. The Curb Alert can be purchased directly from one of these vendors, either here, or here.

 

2015 Ford Mustang STO-N-SHO Removable License Plate Bracket

If you are in one of those “front plate states”….you know the states that require all of us to carry a front license plate or risk the chance of begin pulled over by the police and getting a ticket? Well if you are one of those “lucky” Mustang owners then we have some news that might just make your day. Big Mike’s Performance has developed a quick release, removable front license plate bracket. The great thing about this bracket is that you can remove it when you are at a car show or when you don’t need a front plate. When you are driving down the highway and need to have a plate then you simply snap this bracket back into place.

2015 Ford Mustang STO-N-SHO removable license plate bracket

2015 Ford Mustang STO-N-SHO removable license plate bracket

Big Mike’s Performance Parts’ STO N SHO™ is an aftermarket detachable front license plate mounting system that is designed for those cars whose appearance would be ruined by use of the factory mounting location. Stay in compliance with state law by simply STOing your front license plate when you want to SHO the beauty of your car.

Big Mike’s Performance Parts’ STO N SHO™ is a two-piece detachable mounting system consisting of a front license plate holder and a base mounting plate.

Removal and installation of the front license plate is easy

Requires only the pull of a spring loaded pull pin Remaining base plate is virtually undetectable The STO N SHOTM aftermarket detachable front license plate bracket mounting system is manufactured in the USA using quality materials and parts. The front and base plates are precision laser cut and hand burnished. Each tube and rod is machine cut and hand cleaned. Each STO N SHOTM aftermarket detachable front license plate bracket mounting system is expertly hand welded and drilled. After it’s assembled the base plate welds are ground smooth. The bracket is then anodized black. The final step in the process is to install the pull pin and test the product. While the bracket may look simple in appearance, a lot of time and work goes into making each STO N SHOTM aftermarket detachable front license plate bracket mounting system to ensure you receive a quality product.

Constructed of 5052 and 6061 aluminum Welded and anodized black Built to last and comes with a limited life time warranty Big Mike’s Performance Parts” STO N SHO™ requires small holes to be drilled on the underside of your vehicle. These holes are not visible and in no way detract from the look of your car.

Requires 2 holes All parts required for installation included, however, tools are required.

We were fortunate enough to find a few vendors that carry these. RPI Designs and Southern Car Parts. You can find them at RPI Here: http://www.rpidesigns.com/shop/item.aspx?itemid=5032 or if you prefer the vendor Southern Car Parts, they have them here: http://www.southerncarparts.com/2015-ford-mustang-sto-sho-removable-license-plate-bracket-p-6556.html

We are sure that this bracket will be quite popular with many 2015 Ford Mustang owners looking for a solution to the front plate problem.

Covercraft Car Covers is Leading the Way in Covering your 2015 Ford Mustang

You might have just picked up your 2015 Ford Mustang GT, V6 or Eco-Boost and want to keep it clean while not in use. We found that Covercraft Industries has a complete line of car covers for your new Ford Mustang. Covercraft carries a wide range of car covers.  Using Block-It Fabric technology, this car cover works well for both Indoor and Outdoor uses. With fantastic breathability, this car cover is also good at water resistance, UV resistance, and Dust Protection. If your vehicle is always Outdoors in more extreme elements, then the CoverCraft Weathershield HD is the best choice for you, but if your vehicle spends time both indoors and out, then the Block-It Car Cover line is a fantastic choice. Great, versatile, protection at an affordable price! Block-It fabrics stop water from entering, but breathe very well incase there is any moisture inside of the cover to help allow it to evaporate. This fantastic material is extremely versatile, and allows for great breathability to be coupled with protection. This cover works very well as an outdoor cover in non-extreme conditions, and also fantastic indoors where it protects your vehicle from dust. Water-resistant, breathable, and protective with soft inner lining.

Another great Mustang car cover is Covercraft Noah Cover…Does your car car occasionally sit in the elements? Do you need a car cover that can protect your vehicle from the hazards of the outdoors? The NOAH Corvette Car Cover from Covercraft is the answer. Made in the USA by Kimberly Clark, the fabric weighs only 4.75 oz./sq. yd., so it’s very easy to handle and fold. Noah Corvette Car Covers are made from a fabric that is the most breathable, but water resistant car cover on the market. It is also considered the best Stormproof type car cover around, in addition to providing protection from the elements, it also has some thickness to the material so that it will also provide a degree of dent protection (unlike other “Storm proof” car covers from other manufacturers). NOAH barrier fabric actually stops water, yet it “breathes” to allow any trapped moisture, seam seepage or condensation to easily evaporate.  The unique construction process (patent pending) results in a cover with maximum all-weather protection…highly water resistant, dust resistant, UV resistant and breathable to make sure moisture and/or heat don’t stay under the cover.

Covercraft also has the FormFit car cover is designed for the true sports car enthusiast that has his favorite vehicle tucked away in the garage most of the week and then uncovers it for the weekend spins around town. Our Car enthusiast also likes his car to look almost as sexy covered as it does when uncovered. Covercraft’s new Form-Fit covers provide a body-hugging fit AND a super soft inside that pampers fine paint finishes without leaving any blemishes in the clear coat. The FormFit indoor car cover looks awesome on any vehicle and is designed to protect garage kept vehicles for the long or short haul in the garage. The FormFit car cover looks so good on your car that you will not want to take it off.

Below is a 2015 Ford Mustang GT from aftermarket parts supplier www.rpidesigns.com with a NOAH Cover (Found here)

2015 Ford Mustang GT Covercraft Noah Car Cover

2015 Ford Mustang GT Covercraft Noah Car Cover

 

 

 

 

 

 

 

 

 

 

Another aftermarket car parts supplier, www.southerncarparts.com offers a great configurator, where you can put in any car make, model, and car cover style and build that car cover to fit your Mustang. Shown here

 

No matter where you Mustang rests while it’s not in use, you can be sure that Covercraft will keep it clean and keep it safe!

2015 Lloyd Floor Mats Hit the Aftermarket for the all new Mustang

The automotive aftermarket as been busy and innovative with great new goodies to add to your new 2015 Ford Mustang. One of the items that quickly caught our eye was the Lloyd embroidered floor mats. These floor mats come embroidered with many different logos, from the 5.0 logo, to the Pony logo to Tri-Bar Pony logo, GT logo and even the special 50th anniversary logo. These Lloyd floor mats comes in your choice of either black carpet or red carpet. A couple of parts houses we found were RPI Designs here: http://www.rpidesigns.com/shop/category.aspx?catid=559 and also North American Tuning here: http://www.northamericantuning.com/2015_Mustang_Interior_Parts_s/496.htm

2015 Ford Mustang Lloyd Floor Mats

2015 Ford Mustang Lloyd Floor Mats

Lloyd Floor Mats has been in the car floor mats business since 1974. Lloyd Mats is the largest floor mat manufacturer for Ford Mustang in the world. So you can rest assured that you are getting a quality mat that will fit your Mustang like OEM, often times even better.

2015 Ford Mustang Lloyd Floor Mats

2015 Ford Mustang Lloyd Floor Mats

From what we understand, Lloyd Manufacturing builds these custom floor mats to order and they ask customers to order 5-7 business days before they need them so that customers can make sure their Mustang floor mats will arrive in time for their needs.

2015 Ford Mustang 6 News © 2014 Frontier Theme